Hot Rolled Structural Carbon Steel Profile H Iron Beam 20mm Decoiling

Carbon Steel H Beam

I-shaped steel, whether ordinary or light, because the section size is relatively high and narrow, so the moment of inertia of the two main axes of the section is quite different, so it can only be directly used in the web plane bending members or the composition of lattice stress members It is not suitable for axial compression members or bending members perpendicular to the web plane, which makes it has great limitations in its application scope. I-beam is used in buildings or other metal structures. The inner and outer flanges of H-beams are parallel or nearly parallel, and the flange ends are right angles, so it is named parallel flange I-beam The web thickness of H-shaped steel is smaller than that of ordinary I-steel with the same high web, and the flange width is larger than that of ordinary I-steel with the same high web, so it is also named wide flange I-steel.

H BEAM STRUCTIRE STEEL
Steel Structure Workshop, Prefabricated Steel Structure Building:
1. Light weight, high strength, 50years durable use, no construction waste.
2. Quality certification: ISO9001: 2008,ISO14001:2004
3. Cost considering: Time saved, cost saved;
4. Easy move, materials can be recycled used, environmentally;
5. Used widely, used as factory, warehouse, office building, aircraft hangar etc.
6. Structural durability, easy maintenance.

STEEL I BEAM & IPE BEAM

IPE BEAMS

H section steel flange wide web thin specifications more flexible, used in a variety of truss structure can save metal 15%~20% due to its flange inside and outside parallel, edge end is a right Angle, easy to assemble and combine into a variety of components, thus saving welding riveting workload about 25%, can greatly speed up the construction of the project, shorten the construction period

Because of the advantages mentioned above, H-beam application, mainly used in: all kinds of civil and industrial building structures; All kinds of large-span industrial plants and modern high-rise buildings, especially in areas with frequent seismic activity and industrial plants under high temperature working conditions; Large Bridges with large cross section stability and large span are required; Heavy equipment; Expressway; Ship frame; Mine support; Foundation treatment and dam works; Various machine components

1. Low processing cost: the cost of hot dip galvanized rust is lower than the cost of other paint coating;

2 durable: hot dip galvanized Angle steel with gloss, uniform zinc layer, no leakage, no slip, strong adhesion, strong corrosion resistance, in the suburban environment, the standard hot dip galvanized rust thickness can be maintained for more than 50 years without repair; In urban and offshore areas, the standard hot-dip galvanized coating can be maintained for 20 years without repair. 3 good reliability: galvanized layer and steel is metallurgical combination, become a part of the steel surface, so the durability of the coating is more reliable;

4 coating toughness: galvanized layer forms a special metallurgical structure, this structure can withstand mechanical damage in transport and use;

5 protection: each part of the plated parts can be plated with zinc, even in the sag and hidden place can be protected;

6 save time and effort: galvanizing process is faster than other coating construction method, and can avoid the time required to brush on the site after installation